SNOW CALAMARI

POWDER / DEEP CARVING / ROCKER TO CAMBER / TAPERED DIRECTIONAL

SNOW CALAMARI is a board with very directional geometry, namely: nose 30 cm long and stance setback is 25 mm from the center of the working area. The nose is wider than the tail and hybrid camber has a pronounced dominance of the rocker in the nose. This beauty is created exclusively for powder. Her task is to surf in powders, like on the waves in the ocean. It should be taken only at the most snow-covered winter resorts, to feel the complete thrill of powder. An important, technical role is played by aluminum plates located in the nose and tail parts of the board. Starting from the tests, we decided their location was necessary. Due to their presence, the nose and tail parts become more resistant to mechanical damage, and much easier to repair.

PROPERTIES

GEOMETRY

TAPERED DIRECTIONAL

12,000.00

TECHNOLOGIES

  Topsheet: Modified two-layer polyamid

  Fiberglass: Triaxial springy fiberglass (0;+-45)

   Core: Flex European aspen/ birch stringers

   Carbon reinforcement: Nose and tail carbon reinforcement

   Sidewall: Impact resistant polyurethane

   Running base: P-tex Ultra high molecular weight running base

   Inserts/stance: High-strength stainless steel/4х2 system

   Edge: High-strength alloy steel

   Graphics: Sublimation/silk screening

 

PARAMETERS

Length (CM) Running length (CM) Effective edge (СМ) Waist width (CM) Nose/Tail width (CM) Nose/Tail width (CM) Sidecut radius (М) Setback (ММ) Stance range (CM) Raiders height range (CM) Raiders weight range (KG)
155 117 110 265 31.36/30.0 30/15 7.3 25 52-64 159-191 53->
160 122 115 26.5 31.63/30.25 30/15 7.5 25 52-64 159-191 63->
LENGTH

155, 160